Cleaning exam

description

How To Properly Brush & Floss

Brushing and flossing are of paramount importance to oral hygiene. Though bi-annual professional dental cleanings remove plaque, tartar, and debris, excellent homecare methods are equally valuable. Proper brushing and flossing can enhance the health of the mouth, make the smile sparkle, and prevent serious diseases.

Reasons why proper brushing and flossing are essential:

Prevention of tooth decay -
Tooth decay is one of the leading causes of tooth loss, and its treatment often requires complex dental procedures. Tooth decay occurs when the acids found in plaque erode the natural enamel found on the teeth. This phenomenon can easily be prevented by using proper home hygiene methods.

Prevention of periodontal disease -
Periodontal disease is a serious, progressive condition which can cause tooth loss, gum recession, and jawbone recession. Periodontal disease is caused by the toxins found in plaque and can lead to serious health problems in other parts of the body. Removing plaque and calculus (tartar) from the surface of the tooth using a toothbrush and from the interdental areas using dental floss, is an excellent way to stave off periodontal problems.

Prevention of halitosis -
Bad breath or halitosis is usually caused by old food particles on or between the teeth. These food particles can be removed with regular brushing and flossing, leaving the mouth healthier, and breath smelling fresher.

Prevention of staining -
Staining, or yellowing, of teeth can be caused by a wide variety of factors such as smoking, coffee, and tea. The more regularly these staining agents are removed from the teeth using brushing and flossing techniques, the less likely it is that the stains will become permanent.

The Proper Way to Brush

The teeth should be brushed at least twice a day, ideally in the morning and before bed. The perfect toothbrush is small in size with soft, rounded-end bristles, and is no more than three months old. The head of the brush needs to be small enough to access all areas of the mouth, and the bristles should be soft enough so as not to cause undue damage to the gum tissue. The American Dental Association (ADA) has given electric toothbrushes their seal of approval, stating that those with rotating or oscillating heads are more effective than other toothbrushes.

Here is a basic guide to proper brushing:

  • Place the toothbrush at a 45-degree angle where the gums and teeth meet.
  • Use small circular motions to gently brush the gumline and teeth.
  • Do not scrub or apply too much pressure to the teeth, as this can damage the gums and tooth enamel.
  • Brush every surface of every tooth, cheek-side, tongue-side, and chewing surfaces. Place special emphasis on the surfaces of the back teeth.
  • Use back and forth strokes to brush the chewing surfaces.
  • Brush the tongue to remove fungi, food, and debris.

The Proper Way to Floss

Flossing is a great way to remove plaque from the interdental regions (between the teeth). Flossing is an especially important tool for preventing periodontal disease and limiting the depth of the gum pockets. The interdental regions are difficult to reach with a toothbrush and should be cleansed with dental floss on a daily basis. The flavor and type of floss are unimportant; choose floss that will be easy and pleasant to use.

Here is a basic guide to proper flossing:

  • Cut a piece of floss to around 18 inches long.
  • Wrap one end of the floss around the middle finger of the left hand and the other end around the middle finger of the right hand until the hands are 2-3 inches apart.
  • Work the floss gently between the teeth toward the gum line.
  • Curve the floss in a U-shape around each individual tooth and carefully slide it beneath the gum line.
  • Carefully move the floss up and down several times to remove interdental plaque and debris.
  • Do not pop the floss in and out between the teeth as this will inflame and cut the gums.

If you have any questions about the correct way to brush or floss, please contact our office.

I-Cat 3D Imaging

Physicians have relied on computerized axial tomography scans (CAT) for many years. CAT scans are an X-ray procedure that uses many different X-ray images with the help of computers to generate cross-sectional or even 3D views of internal organs and structures within the body. A knee replacement surgery, for example, would never be performed without first examining 3D imaging.

More recently however, dentists have begun to rely on 3D imaging techniques and i-CAT® scans to provide them with a detailed view of the mouth and skull. The advantage that 3D imaging holds over regular dental x-rays is that bone structure, bone density, tissues, and nerves can be viewed clearly.

i-CAT® scans can be completed in less than half a minute. This means that far less radiation enters the body than if a regular set of bitewing X-rays were taken. The main use for i-CAT® scans is as an aid to plan dental implant treatment and other oral surgery.

Dental implants are the most sophisticated replacement for missing teeth, but have historically proven to be time-consuming to place. i-CAT® scans vastly reduce the time it takes to place implants. It is thought that in the near future implants will be placed in a single visit because of this unique type of imaging.

How are i-CAT® scans used?

i-CAT® scans are advantageous because they allow the dentist to magnify specific areas of the face. In addition, the dentist can easily view cross-sectional ?slices? of the jaw, which makes planning treatment easier and faster.

Here are some of the main ways in which i-CAT® scans are used in dentistry:

  • Assess the quality of the jawbone where the implant will be placed.
  • Determine where nerves are located.
  • Diagnose tumors and disease in the early stages.
  • Measure the density of the jawbone where the implant will be placed.
  • Pinpoint the most effective placement for implants, including the angle of best fit.
  • Plan the complete surgical procedure in advance, from start to finish.
  • Precisely decide on the appropriate size and type of implants.
  • View exact orientation and position of each tooth.
  • View impacted teeth.

How are i-CAT® scans performed?

i-CAT® scans are quick and simple to perform. A Cone Beam Imaging System is at the heart of the i-CAT® scanner. During the scan, the patient sits stationary on a designated seat. The cone beams are used to take literally hundreds of pictures of the face. These pictures are used to compile an exact 3D image of the inner mechanisms of the face and jaw. The dentist is able to zoom in on specific areas and view them from alternate angles.

Previous patients report the i-CAT® scanner is comfortable because they remain in a sitting position at all times. Additionally, the scanner provides an open environment, meaning that claustrophobic feelings are eliminated. The i-CAT® scan is an incredible tool that is minimizing the cost of dental treatment, reducing treatment time and enhancing the end results of dental surgery.

If you have questions or concerns about i-CAT® scans or 3D imaging, please contact our office.

Cephalometric X-Rays

The cephalometric X-ray is a unique tool that enables the dentist to capture a complete radiographic image of the side of the face. X-rays in general offer the dentist a way to view the teeth, jawbone, and soft tissues beyond what can be seen with the naked eye.

Cephalometric X-rays are extraoral, meaning that no plates or film are inserted inside the mouth. Cephalometric and panoramic X-rays display the nasal and sinus passages, which are missed by intraoral bitewing X-rays.

Cephalometric X-rays are usually taken with a panoramic X-ray machine. The adapted machine will have a special cephalometric film holder mounted on a mechanical arm. An X-ray image receptor is exposed to ionizing radiation in order to provide the dentist with pictures of the entire oral structure. The advantage of both cephalometric and panoramic X-rays is that the body is exposed to less radiation.

Cephalometric X-rays are not as common as "full sets" or bitewing X-rays, but they serve several important functions:

  • Provide views of the side profile of the face.
  • Provide views of the jaw in relation to the cheekbone.
  • Provide information about "bad bites" or malocclusions.
  • Allow measurement of the teeth.
  • Identify fractures and other injuries to the teeth and jawbone.
  • Assists in orthodontic planning.

How are cephalometric X-rays taken?
Cephalometric X-rays are completely painless. The head is placed between the mechanical rotating arm and the film holder, which is placed on another arm. The arm rotates around the head capturing images of the face, mouth, and teeth. The clarity and sharpness of these images will depend on the positioning of the body. The images are usually magnified up to 30%, so any signs of decay, disease, or injury can be seen and treated.

After capturing cephalometric X-rays, the dentist will be able to see a complete side profile of the head. This can assist in orthodontic planning and allow an immediate evaluation of how braces might impact the facial profile and teeth. Another common use for this type of X-ray is to determine specific measurements prior to the creation and placement of dental implants.

If you have any questions or concerns about cephalometric X-rays, please ask your dentist.

Digital X-Rays

Digital radiography (digital X-ray) is the latest technology used to take dental X-rays. This technique uses an electronic sensor (instead of X-ray film) that captures and stores the digital image on a computer. This image can be instantly viewed and enlarged, helping the dentist and dental hygienist detect problems more easily. Digital X-rays reduce radiation 80-90% compared to the already low exposure of traditional dental X-rays.Dental X-rays are essential, preventative, diagnostic tools that provide valuable information not visible during a regular dental exam. Dentists and dental hygienists use this information to safely and accurately detect hidden dental abnormalities and complete an accurate treatment plan. Without X-rays, problem areas can go undetected.Dental X-rays may reveal:

  • Abscesses or cysts.
  • Bone loss.
  • Cancerous and non-cancerous tumors.
  • Decay between the teeth.
  • Developmental abnormalities.
  • Poor tooth and root positions.
  • Problems inside a tooth or below the gum line.
Detecting and treating dental problems at an early stage can save you time, money, unnecessary discomfort, and your teeth!Are dental X-rays safe? We are all exposed to natural radiation in our environment. Digital X-rays produce a significantly lower level of radiation compared to traditional dental x-rays. Not only are digital X-rays better for the health and safety of the patient, they are faster and more comfortable to take, which reduces your time in the dental office. Also, since the digital image is captured electronically, there is no need to develop the X-rays, thus eliminating the disposal of harmful waste and chemicals into the environment.Even though digital X-rays produce a low level of radiation and are considered very safe, dentists still take necessary precautions to limit the patient's exposure to radiation. These precautions include only taking those X-rays that are necessary, and using lead apron shields to protect the body.How often should dental X-rays be taken? The need for dental X-rays depends on each patient's individual dental health needs. Your dentist and dental hygienist will recommend necessary X-rays based upon the review of your medical and dental history, a dental exam, signs and symptoms, your age, and risk of disease.A full mouth series of dental X-rays is recommended for new patients. A full series is usually good for three to five years. Bite-wing X-rays (X-rays of top and bottom teeth biting together) are taken at recall (check-up) visits and are recommended once or twice a year to detect new dental problems.

Panoramic X-Rays

Panoramic X-rays (also known as Panorex® or orthopantomograms) are wraparound photographs of the face and teeth. They offer a view that would otherwise be invisible to the naked eye. X-rays in general, expose hidden structures, such as wisdom teeth, reveal preliminary signs of cavities, and also show fractures and bone loss.

Panoramic X-rays are extraoral and simple to perform. Usually, dental X-rays involve the film being placed inside the mouth, but panoramic film is hidden inside a mechanism that rotates around the outside of the head.

Unlike bitewing X-rays that need to be taken every few years, panoramic X-rays are generally only taken on an as-needed basis. A panoramic X-ray is not conducted to give a detailed view of each tooth, but rather to provide a better view of the sinus areas, nasal areas and mandibular nerve. Panoramic X-rays are preferable to bitewing X-rays when a patient is in extreme pain, and when a sinus problem is suspected to have caused dental problems.

Panoramic X-rays are extremely versatile in dentistry, and are used to:

  • Assess patients with an extreme gag reflex.
  • Evaluate the progression of TMJ.
  • Expose cysts and abnormalities.
  • Expose impacted teeth.
  • Expose jawbone fractures.
  • Plan treatment (full and partial dentures, braces and implants).
  • Reveal gum disease and cavities.

How are panoramic X-rays taken?

The panoramic X-ray provides the dentist with an ear-to-ear two-dimensional view of both the upper and lower jaw. The most common uses for panoramic X-rays are to reveal the positioning of wisdom teeth and to check whether dental implants will affect the mandibular nerve (the nerve extending toward the lower lip).

The Panorex equipment consists of a rotating arm that holds the X-ray generator, and a moving film attachment that holds the pictures. The head is positioned between these two devices. The X-ray generator moves around the head taking pictures as orthogonally as possible. The positioning of the head and body is what determines how sharp, clear and useful the X-rays will be to the dentist. The pictures are magnified by as much as 30% to ensure that even the minutest detail will be noted.

Panoramic X-rays are an important diagnostic tool and are also valuable for planning future treatment. They are safer than other types of X-rays because less radiation enters the body.

If you have questions or concerns about panoramic X-rays, please contact our practice.

Fluoride Treatments

Fluoride is the most effective agent available to help prevent tooth decay. It is a mineral that is naturally present in varying amounts in almost all foods and water supplies. The benefits of fluoride have been well known for over 50 years and are supported by many health and professional organizations.

Fluoride works in two ways:

Topical fluoride strengthens the teeth once they have erupted by seeping into the outer surface of the tooth enamel, making the teeth more resistant to decay. We gain topical fluoride by using fluoride containing dental products such as toothpaste, mouth rinses, and gels. Dentists and dental hygienists generally recommend that children have a professional application of fluoride twice a year during dental check-ups.

Systemic fluoride strengthens the teeth that have erupted as well as those that are developing under the gums. We gain systemic fluoride from most foods and our community water supplies. It is also available as a supplement in drop or gel form and can be prescribed by your dentist or physician. Generally, fluoride drops are recommended for infants, and tablets are best suited for children up through the teen years. It is very important to monitor the amounts of fluoride a child ingests. If too much fluoride is consumed while the teeth are developing, a condition called fluorosis (white spots on the teeth) may result.

Although most people receive fluoride from food and water, sometimes it is not enough to help prevent decay. Your dentist or dental hygienist may recommend the use of home and/or professional fluoride treatments for the following reasons:

  • Deep pits and fissures on the chewing surfaces of teeth.
  • Exposed and sensitive root surfaces.
  • Fair to poor oral hygiene habits.
  • Frequent sugar and carbohydrate intake.
  • Inadequate exposure to fluorides.
  • Inadequate saliva flow due to medical conditions, medical treatments or medications.
  • Recent history of dental decay.
Remember, fluoride alone will not prevent tooth decay! It is important to brush at least twice a day, floss regularly, eat balanced meals, reduce sugary snacks, and visit your dentist on a regular basis.